Module feature overview

Every module on vProxyer, in detail

Capability lists for each module — jump to a section, read them in order, or contact us for tailored advice.

Not sure which modules fit? Contact us for advice. Contact for advice

Ready 01 / 09

01 WAN · Multi-session PPPoE

Multi PPPoE (Multi-session)

Run many PPPoE sessions on one appliance — monitor status and control everything from the Web UI.

Key capabilities

Create and manage sessions by NIC / VLAN / ISP group (toggle per session or in bulk)
Auto dial queue — cap concurrent dials to the ISP to avoid session blocks, track Active / dialing / failed
Obtain WAN IPv4 & IPv6, with per-session routing once an IP is assigned
Change / reset IP manually or on a minute timer (Auto Reset); change MAC when needed
Per-session API keys (create / rotate / delete) with call-rate limits
Bind as System WAN — use a session as the system path (metric / weight, balance / backup)
IP stats — unique vs duplicate counts over 1h–3h–24h; monitor RX/TX traffic
Route Egress — assign a PPPoE session (or Virtual IP) as the outbound path for proxy / clients

Run many PPPoE links at once, change IPs when needed, watch session health, and use those sessions as IP sources for your network and proxy.

Contact for advice

Licensed 02 / 09

02 WAN · Virtual IP / VLAN

Virtual IPs

Create many virtual IP egress paths on one NIC/VLAN — as IP sources for the network, proxy or individual client machines.

Key capabilities

Create Virtual Interfaces by VLAN on uplink ports (eth0, eth1…), with ISP group and DNS profile
Manage many Virtual IPs — add / enable–disable / delete each; Start/Stop to obtain an IP (DHCP or static)
Flexible addressing: DHCP from modem/4G/upstream · manual static (IP, gateway, DNS) · Auto pool from declared inventory
IP Pool — CIDR ranges, gateway, IP/MAC lists, allow/exclude, allocation strategy (first free / sequential / random)
MAC policy — auto / custom / random; optional per-IP MAC binding in the pool
Status & traffic — Active/Inactive, RX/TX and bandwidth per Virtual IP
System WAN — bind a Virtual IP as a system WAN path (metric / weight, balance / backup)
Use as egress — assign to PC clients (IP Egress), Proxy IPv4, Proxy Gateway, DDNS

Create many virtual IPs on the same NIC, allocate them automatically or from a pool, and use them as egress for clients / proxy — no PPPoE dialing; ideal for modem/4G/VLAN with existing IPs or when you need many fixed or pool-based addresses.

Contact for advice

Licensed 03 / 09

03 Upstream · HTTP / SOCKS5

Proxy 3rd

A third-party upstream proxy catalog (HTTP/SOCKS5) the appliance can use as internet egress instead of PPPoE/Virtual IP.

Key capabilities

Manage the provider catalog — add/edit/delete upstreams (host, port, user/pass, HTTP or SOCKS5)
Provider groups — organize by region or vendor (US, EU, supplier…) for selection or pool rotation
Bulk import / export — bring many providers in at once and export the list
Health check — Live/Dead, egress IP and latency; background checks plus manual Check Live
Enable/disable & bulk actions — toggle, move groups, delete or export many providers at once
Upstream IP change — urlChangeIP support (provider-side change-IP API) for Proxy Gateway rotation
Connection limits — max_connect and time_reset per provider; realtime health via Live Feed in the Web UI
Use as egress — IP Egress (LAN clients), Proxy Gateway (pool / failover), Proxy IPv4 (when licensed)

Store and manage external provider proxies, verify they are live, then assign them as egress for clients, Proxy Gateway or Proxy IPv4 when you need foreign IPs without dialing PPPoE. The catalog exits via the device default WAN; HTTP fits web/HTTPS — prefer SOCKS5 or PPPoE/Virtual IP for UDP/gaming.

Contact for advice

Ready 04 / 09

04 IP Egress Manager · Per-IP routing

IP Egress

Manage DHCP clients by IP and decide each host’s path to the internet.

Key capabilities

Lease management — view/filter clients (IP, MAC, hostname, scope, VLAN, static/dynamic), online/routed/blocked stats, add static IP by MAC, delete leases
Route Egress (core) — assign an egress path per IP or in bulk
System NAT — use the system WAN (Primary/backup or load balance) without a per-client policy route
PPPoE / Virtual IP (ifvlan) — dedicated ip rule + routing table + NAT via that interface
Proxy 3rd — exit via a third-party upstream proxy; Remove egress — clear the route so traffic stays blocked until reassigned
Controls — per-lease bandwidth caps, traffic (rx/tx), block/unblock Internet (egress policy kept), reset counters
Kernel sync — when WAN (PPPoE…) goes up/down or the box reboots, re-apply ip rule / NAT from the saved mapping

IP Egress binds each LAN host to its own exit — manage DHCP leases, pick System NAT / PPPoE / Virtual IP / Proxy 3rd, control bandwidth and Internet block, and keep mappings consistent across WAN flaps or reboots.

Contact for advice

Licensed 05 / 09

05 HTTP · SOCKS5 · Realtime

Proxy IPv4

Manage IPv4 proxy endpoints (HTTP/SOCKS5) in realtime: create, enable/disable, bind egress, and operate in bulk.

Key capabilities

Endpoint management — add / edit / delete / clone; each proxy has port, user/pass, API key, description; runtime enable/disable
Route / Egress — assign an exit per proxy or in bulk: PPPoE, Virtual IP, Proxy 3rd — proxy traffic leaves via the chosen WAN
Protocol & access — toggle HTTP and SOCKS5 (TCP; SOCKS5 includes UDP); Accept WAN IP; DNS profile; domain deny (rule group)
Bulk operations — Enable/Disable, change egress, randomize port / credentials / API key, Apply user profile, copy/export ip:port:user:pass
Monitoring & limits — KPIs (total, running, missing route, errors); traffic/usage; bandwidth limit; reset counters
Filter by protocol, status, route and WAN for fast Web UI operations

Proxy IPv4 turns PPPoE / Virtual IP / Proxy 3rd paths into controlled HTTP/SOCKS5 endpoints — bind the right WAN egress, cap bandwidth, and run bulk ops when you scale.

Contact for advice

Licensed 06 / 09

06 Rotation · API

Proxy rotation & API

Manage proxy sources, rotate IPs with cooldown, and offer an API so customers can change IPs on demand.

Key capabilities

Centralized proxy source / pool management
Rotate by schedule, on demand, or with buffer / cooldown
Self-service customer API for IP changes
Rate-limit API calls per key / account
Track rotation history and source health
Fits retail proxy sales, subscriptions or business packages

Rotation gives proxies a clear IP lifecycle — customers self-serve via API whenever they need a new address.

Contact for advice

Ready 07 / 09

07 Firewall · Forward

Protection & Forwarding

Control inbound/outbound flows, port forwarding and centralized access policy on the appliance.

Key capabilities

Central INPUT / OUTPUT / FORWARD policy
Port-scan protection and unwanted connection filtering
Port forwarding / DNAT for services
Clear allow / DROP rules in the Web UI
Edge protection while exposing proxy and multi-WAN paths
Pairs with Insights for faster incident response

Protection and forwarding keep control of who enters and leaves while still running proxy and LAN services.

Contact for advice

Ready 08 / 09

08 Realtime ops

Insights

Near-realtime visibility into flows — top devices, live connections and report export when you need it.

Key capabilities

Near-realtime operations dashboard
Top devices / clients by traffic or connections
Track active sessions / flows
Export reports for audit or reconciliation
Spot failing paths or anomalies earlier
One place to watch network, proxy and service health

Insights helps operators see what is happening on the device quickly — without jumping across tools.

Contact for advice

Ready 09 / 09

09 LAN services

DHCP & DNS

Manage address pools, leases, default egress and name-resolution profiles in the same system.

Key capabilities

Configure DHCP ranges / LAN address pools
Inspect leases: which device holds which IP
Set default network egress when no per-device IP Egress is attached
DNS / name-resolution profiles for clients
Works with IP Egress when hosts need dedicated paths
Keep LAN admin in the Web UI, with device-console recovery options

DHCP & DNS complete the LAN layer — hand out IPs, resolve names and anchor default egress before per-device tuning.

Contact for advice

Need advice?

Browse module capabilities or talk to the vProxyer team.

The lists above give a quick view of each module. If you need help choosing a package or license — chat or call for advice.

Contact for advice Connection topology Home